Showing posts with label Finished Punch Needle. Show all posts
Showing posts with label Finished Punch Needle. Show all posts

Friday, March 8, 2019

Carrot assembly instructions



I was asked to put together instructions for the carrots and how I assembled it. 
I will do my best to explain. Hope this helps:

1). Punch the carrots using the color code for color placement.
2). When you have finished the punch, cut around the edges leave about 1/4” to 3/8” around the punch so you can turn the weavers cloth back behind the punch.
3). Snip and concave turns so they lay back evenly.



4). Iron the weavers towards the back of the punch. Watch your fingers! I suggest no steam as not to   burn yourself.
5). I used a pre made pillow cover I purchased years ago from a store. You can make your own if you prefer. 
6). Pin your carrots to the pillow cover, in any placement that you like. 
7). Starting at the edge of the green, I then simply whip stitched the carrots to the cover, leaving the top of the carrots where the green is open. ( for the wool strips to be tucked in)



8). When your all done sewing the carrots on.
9).  Use the template for embroidery (provided) and cut out the paper carrots around the dotted lines. Using a transfer pencil I traced the lines for the roots. 
10). Then cut out again around each carrot keeping the roots so each carrot is separated. This gives me the ability to use a transfer pencil to transfer the roots to the fabric using an iron.
11). Place the template around the punched carrot, face down and iron the paper so the image of the roots transfers to the pillow cover. It doesn’t matter which root goes with what carrot. But change the root template for each carrot for variety.
12). Embroider the roots with one of the greens from the punch using a running or stem stitch.
13). Cut 3” to 4”  strips of green wool about 3/16” wide. I used 5 light green and 2 dark green for each carrot. 
14). Make a loop with each strip. Sew them or tie them together at the ends.
15). Tuck them in at the opening that you left at the top of the carrots. To hide the ends. 
16).  Sew them to the pillow cover to secure them.
17). I then snipped the dark green half way so the dark green strip's are not loops. Again for variety.
18). Stuff the pillow and Enjoy! 



Monday, January 14, 2019

Valentine Kisses


Good Monday morning everyone.. The first new punch of 2019. It’s called “Valentine Kisses”. It is a 1, 2 & 3 strand punch using DMC floss. It includes the valentine punch and the hearts (kisses). It also includes where I punch the different strands of floss. ALSO: I’ve added a video on you tube...for the how to assemble and finish. Here’s the link: https://youtu.be/NHjpOkzRVYU..... There are other informative videos on my YouTube channel... do check them out. The pattern is available printed or download in my Etsy shop: https://www.etsy.com/shop/briarcottage. Have a wonderful day and a wonderful New Year......Enjoy, Kate Gillery

Friday, September 14, 2018

Lots going on


Four New FINISHED punch needles are now available in my Etsy shop.
Please keep in mind these are my models for my patterns so there is just one available for each punch, when there gone there gone.
Also please make sure when ordering that you are on the finished punches not the pattern listing.

https://www.etsy.com/shop/briarcottage



Twiggs has Sold, Thank you





Also I have listed 3 new minis patterns.
They are no bigger than 3" and are punched using a 1 strand CTR needle and 1 strand of floss.








And last but not least. The copper hangers I use on the minis are also available.




Wishing you a wonderful day!

Enjoy, Kate


Thursday, May 31, 2018

Scrappy


Finish: Made into a pillow. Using linen on the back and on the edges.
I purchased the linen from Joanne Fabrics it is dressmakers linen. The background of the punch matches the linen beautifully. The weavers cloth is the background of the punch, If you order it printed on cloth from my Etsy shop the copyright is printed on the inside of the punch needle so it does not show.


This pattern is perfect for scrap threads, you may choose to make the flowers all different colors. 


The top check is free standing as well as the bottom flower It gives it another dimension.




Now available in my Etsy shop: "SCRAPPY" The pattern with the bottom flower and the check measure 7" high and the width is 9 1/2". The model is punch using a CTR 3 strand needle. It is color coded using DMC & Gentle arts floss. I have also included a conversion for the Gentle Arts to DMC, although I do recommend the Gentle Arts colors for this punch they have a little variation in the floss and the colors are not so pronounced. 

Here is a link to my Etsy shop:
https://www.etsy.com/shop/briarcottage

Have a wonderful day, Kate



Tuesday, January 9, 2018

All Done


Winter white Is finished,
Turned and ironed the weavers cloth to the back at the very edge of the punch and left about a 1/2 inch hem.  It is then backed with wool Turned the sides to about 1/2 inch, then blanket stitched the punch needle to the wool. Added the beaded pearls by stitching each one separately using a beading needle which is very long and ultra thin. Added my label to the back and it's all ready for next Christmas... I will however leave it out a bit for the winter. 
Enjoy, Kate